How to Restore Shine to a Marble Countertop

Marble island inside expensive kitchen in Atlanta GAAlthough Hotlanta is known for its heat and humidity, caring for and restoring marble countertops in Atlanta doesn’t demand anything special. Everyone can use the same basic tools, tips, and tricks. Although marble countertops can last for years, that doesn’t make them immune to wear and tear or aging. Eventually, they might accumulate light scratches on the surface or start looking dull. Although marble isn’t prone to staining, it is always possible. Periodic cleaning and care does a lot to lengthen the life of your marble countertops, but every now and then they may need to be restored. Here are some basic steps that you can do yourself. Performing your own restoration can save you more than half the cost versus hiring a contractor.

Getting Started

First, you’ll need to pick up a polishing kit. Your polishing kit should come with a DVD, which will walk you through the process. Make sure that you watch the video before you tackle the job. Ideally, you should buy a polishing and sealer kit. Sealing your marble countertop will be the final step, and it’s important for preserving it. The sealant can prevent damage and help your countertop stay looking like new even longer.

Second, clean your marble countertop. Clean the countertop with a mild, non-abrasive detergent and either a soft cloth or a sponge. Make sure that you rinse, wash, wipe, and dry the countertop thoroughly. It’s important that you have all of the soap removed before you apply the polishing compound. If your countertop is stained, you’ll have to use a stain remover. Make sure that the stain remover is specifically designed for marble countertops. Stain removers that aren’t designed for marble can be overly abrasive and cause damage.

Polishing Up

Big kitchen in Atlanta GAThird, use the polishing compound. Apply a small amount of the polishing compound directly to the marble as directed on the bottle. Next, work the compound with a felt wheel at low or medium speed. It’s best to focus on a one or two square foot area at a time. You don’t need to press too hard. Corners and edges can be difficult to reach with the wheel. Instead, you can use the compound and a cloth, working in a rotary motion. Once you’ve completed the polishing, you can remove the compound with a dry cloth or a vacuum. Finish it off with a damp cloth so that you remove any of the remaining compound.

Sealing the Deal

Fourth and finally, seal the marble. This will be done the following day. You can apply the sealant with a soft-bristled brush, or with a soft, clean rag. The sealer that you purchased should have step-by-step instructions that will walk you through the process. After the sealer has fully dried, it should look as good as new.

If your kitchen marble countertop installation was handled properly and professionally, it should last you many years. With some basic cleaning, maintenance, and upkeep, it’ll last even longer and look great. As long as you keep hot items off the surface and don’t put too much weight on the countertop, you should be able to avoid cracking. Scratches can be prevented by using cloths or cooling racks. Discoloration can be avoided by keeping harsh chemicals or cleaners away from the marble. As long as you take care of it, your marble should stay bright, clean, and looking fantastic for years to come.

Leave a Comment

Your email address will not be published. Required fields are marked *